Basic Configuration - Audio Pro LV2 e Manual Del Propietário

BASIC CONFIGURATION

Before connecting to computer, see Mac or PC setup.
1. Connect the TX100 transmitter to the computer.
2. Connect both LV2 speakers to 230V outlet.
Done! Play your music on your computer.
WIRELESS STATUS:
LED lights up blue on speakers and transmitters when wireless connection is established.
LED lights up red on speakers and transmitters when no wireless connection is established.
Note:
If speakers are in standby mode, LED is red even though wireless connection is established.
Turns blue when speakers receives signal.
MAC SETUP
1. Insert TX100 transmitter to a free USB socket.
2. Go to System Preferences, choose Sound under Hardware.
3. Click Output in menu, choose "USB Headset".
Done! You can now send audio from your computer.
PC SETUP
Please do following setup before using music playing software (for example iTunes or Spotify).
1. Insert TX100 transmitter to a free USB socket. Wait until software has been installed.
(See lower right hand corner, message window will open when sound device is ready to use.)
Done! You can now send audio from your computer.
For some PC computers you may need to perform these settings:
2. Click Start button, go to Control Panel and choose Sound & Sound devices.
3. Under playback of audio, default unit, choose "USB Headset".
Done! You can now send audio from your computer.