Publicidad
Idiomas disponibles
Idiomas disponibles
7.9 Receiver Mode
1.
Connect the VDPLWB to your fixture using a DMX cable.
2.
Press MENU until the display shows <Input Mode>. Conform with
ENTER. Use UP/DOWN to select <WIFI>. Conform with ENTER.
3.
Press MENU until the display shows <Channel Mode>. Conform with
ENTER. Use UP/DOWN to select your channel. Conform with ENTER.
Remark:
Make sure not to exceed the distance of 700 m between receiver and
transmitter.
One transmitter can be connected to up to 512 receivers.
a. transmitter
7.10 DMX Connection
When applicable, connect an XLR cable to the female XLR output of a
controller (not incl.) and the other side to the male XLR input of the
device. Multiple devices can be linked through serial linking. The linking
cable shall be a dual core, screened cable with XLR input and output
connectors.
DMX input
V. 01 – 09/02/2015
VDPLWB
1
GND
2
negative
3
positive
8
b. receiver
DMX output
©Velleman nv
Publicidad
