Category Selection - Panasonic CQ-C3405U Manual De Instrucciones

XM Receiver
Up to 6 channels can be preset in XM1 to XM3
respectively.
1
Tune into a channel.
2
Hold down the numeric button [1] to
[6] for 2 sec. or more until the display
blinks once.
Note: New channels overwrite existing saved channel
after this procedure.
Category Setting
You can toggle the category on and off every time you
hold down [BAND] for 2 sec. or more. If the category is
set to on, the unit operates as follows for each button:
Category mode ON
Appears at category mode ON.
• Enables category switching.
• Enables channel selection only within the
category selected by category switching.
20
CQ-C5405U/C5305U/C3405U/C3305U
\CQ-C5405U/CQ-C5305U]

Category Selection

1
Press [] or [] to display the
category name. (CAT ON)
2
Press [] or [] while the category
name is displayed to select a category.
Seeking will start.
Direct Access
A channel can be directly selected.
Example: channel number 10
1
Press [#] (NUMBER).
2
Press [1] [0].
3
Press [SET].
CQ-C5405U/C5305U/C3405U/C3305U
Notes:
• The previous screen reappears if a nonexistent channel
is selected.
• "OFF AIR" is displayed and the previous screen
reappears in a few seconds if an off-the-air channel is
selected.
21