Panasonic CQ-C3405U Manual De Instrucciones página 61

XM Receiver
Connecting XM Receiver
• Connect the optional XM receiver (XMD1000) with
optional Digital Adapter.
Getting Started
It is required to sign up to become an XM Satellite Radio
subscriber. After checking your XM Satellite Radio ID,
sign up on the XM's website or by calling them.
1
Check of XM Satellite Radio ID
• Write down the ID indicated on the lower right of your
XM receiver (XMD1000).
• Check the ID shown by tuning your XM Radio to
channel 0. (Refer to "Channel Selection" below.)
RADIO ID display
2
Activate the XM Satellite Radio
Select either of the below to sign up.
• Web site: http://www.xmradio.com/activation
• Phone number: 1-800-852-9696
1
Press [SOURCE] to select the XM
Satellite Radio mode.
2
Press [BAND] to select a band.
Notes:
• Connect the optional XM receiver (XMD1000).
• To connect the XM receiver (XMD1000), it is required
to use an optional extension cord that is produced by
XM exclusively for Panasonic products.
• "RADIO ID" is displayed with channel 0.
• "LOADING" is displayed during the acquisition of audio
data or information.
3
Select a channel.
Channel Selection
[] (TUNE): Preceding channel
[] (TUNE): Next channel
22
CQ-C5405U/C5305U/C3405U/C3305U
[CQ-C3405U/CQ-C3305U]
XMD 1000 XM Radio ID
L/C 1144XXXXXX XM RADIO ID : XXXXXXXX
Preset Channel Selection
Press the numeric button [1] to [6].
Notes:
• Because preset memory setting is performed with
Service IDs in each channel, a channel may switch
to another that has been stored under the same
Service IDs when calling up a preset channel.
However, broadcasting contents are the same as
what the stored channel provides.
• Channel selection is not available during the
reception of channel 1 with category ON. To
receive other channels, set the category to OFF or
switch to another category. ( page 24)
Band Channel number Preset number
Press [DISP].
Band/channel number/
preset number
(Data reading)
Channel name (Default)
(Data reading)
Artist name
(Data reading)
Song title
(Data reading)
Category name
Clock time
Display off
CQ-C5405U/C5305U/C3405U/C3305U
Indicates the satellite
receiver is ready.
Notes:
• "" is displayed when there is no information.
• "UPDATING" is displayed during the update of the
identifi cation code.
23