Cleaning And Maintenance; Technical Specifications - HQ-Power HQMX10001 Manual Del Usuario

FX RETURN
23.
Overall volume level of the incoming effects signals.
FX PAN
24.
This knob adjusts the volume level balance of the effect.
25. MAIN METERS
Peak meters (two columns of twelve LEDs) indicating the output level ranging from -24 dB low
signal), to 0 dB (normal level) to the top (distorted signal).
48 V PHANTOM SWITCH
26.
On-off switch to add +48 VDC phantom power to all the XLR microphone inputs. The LED next
to the switch will burn as the phantom power is switched on.
Most modern professional condenser microphones require phantom power, which is a low-
current DC voltage for the microphone's electronics.
27. PRESET DSP DISPLAY
This display shows the number of the currently selected effects preset.
PRESET EFFECT SELECTOR
28.
Rotate to select one of the 99 preset effects. The current number is shown in the display.
ASSIGN/TAPE/ALT3-4/MAIN MIX CONTROL
29.
Phones: Volume level for your headphones.
You can listen to three sound sources: the main mix, the channels switched to ALT3-4, and
the tape channel. All channels can be selected simultaneously.
99 DSP EFFECTS
30.
List of preset effects.
5.3 Power Section
POWER CONNECTION
31.
This jack accepts the supplied power supply. Before plugging, make sure that the voltage of
your unit is identical to that of the local AC mains supply. Use only the supplied power supply.
POWER SWITCH
32.
Flick to switch the mixer on or off.
6.

Cleaning and Maintenance

There are no user-serviceable parts inside the device. Refer to an authorized dealer for service
and/or spare parts.
Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals,
cleaning solvents or strong detergents.
7.

Technical Specifications

power supply .................................................................................... 220 V~, 50 Hz
maximum levels
MIC input ............................................................................................... 30 dB
LINE input .............................................................................................. 21 dB
OTHERS ................................................................................................. 22 dB
mixer rated outputs
mains ................................................................................................... ± 4 dB
max. output ........................................................................................... 22 dB
frequency response
MIC input to MAINS output
+0, -1 dB, < 10 Hz to 80 kHz
+0.3 dB
V. 03 – 22/03/2017
HQMX10001/HQMX10002
6 ©Velleman nv