General Guidelines; Battery Installation; User Manual - Velleman CS50 Manual Del Usuario

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect the local environmental
rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, do not install or use it and contact your dealer.
For educational purposes only - use only under the supervision of an adult instructor.
2.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
3. How to Set Up the Metal Detector
Only the length of the stem and the angle of the search coil have to be adjusted.
Adjusting the Length of the Stem
1. Turn the nut of the stem clockwise until it loosens.
2. Adjust the length of the stem until you can walk comfortably with the search coil at 0.5 to 2" above
the ground.
3. Tighten the nut by turning counterclockwise.
Adjusting the Position of the Search Coil
1. Loosen the knobs of the search coil and rotate the unit until it is parallel to the ground.
2. Tighten the knobs to keep the search coil from vibrating or rotating during use.
4.

Battery Installation

Remove the cover of the battery compartment located on the handle and insert a new 9 V-battery.
Observe the polarity indications !
5. Operation
The CS50 Treasure Hunter enables you to hunt for coins, jewellery, gold and silver. The LED indicator on
the handle will light when a metal object is detected and the buzzer will be activated.
Hold the CS50 in a comfortable position with the search coil parallel to a surface free of metal objects.
Put the adjustable "ON/OFF" sensitivity switch (on the handle) in the position where the LED indicator
lights up slightly and the buzzer produces the faintest of beeping sounds. This is the "no-metal-detected"
threshold position in which the CS50 is at its most sensitive. Rotate the dial even further to enter the
"metal-detected" state.
Use the "maximum sensitivity point" to perform a test on a metal object. The buzzer will beep at max.
volume and the LED will light at max. intensity. These elements indicate that a metal object has been
detected.
Place the sensitivity switch exactly between the "no metal detected"-state and the "metal detected"-
state. Familiarize yourself with the sensitivity of the device by repeating the test with objects of different
sizes made of various metals, such as copper, iron and aluminium.
Note: The max. sensitivity position will be influenced by environmental factors.
6. Tips for Treasure Hunters

Always install the max. sensitivity position when using the device.

Sweep the metal detector from side to side while maintaining a constant distance between the search
coil and the ground. Do not swing the detector like a pendulum.

Take your time. You may miss a target if you walk too fast.
V. 03 – 11/07/2017
CS50

USER MANUAL

3 ©Velleman nv