Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
The outer ENERGY
LEVEL lights are
flashing alternately
and the i-Light Pro
system is beeping
every ½ second.
The second and
fourth ENERGY
LEVEL lights are
flashing and the
system is beeping.
POSSIBLE
WHAT YOU SHOULD DO
CAUSE
The i-Light Pro
Contact Customer Service (see page 44)
system isn't
for help.
working
properly.
The SKIN
Lift the HAND PIECE from the BASE UNIT and
CONTACT
check the SKIN CONTACT SENSORS. The
SENSORS may
CONTACT SENSORS should slightly protrude
be stuck.
from the sides of the HANDPIECE. You should
be able to press the CONTACT SENSORS down
so that they are flush with the HAND PIECE.
They should spring back to about 2mm when
released. If the CONTACT SENSORS do not
depress or spring back they may be stuck
and may require cleaning. See page 32 for
instructions on how to clean your i-Light Pro
IPL system. If you still can't get it clean, contact
Customer Service on page 44 for help.
39
Publicidad
Tabla de contenido
