Cutting Discs - Bosch MUZ 4 MM 3 Instrucciones De Uso

Tabla de contenido

Publicidad

en
Multi function blade
for chopping, puréeing, blending, cutting and for
making sauces and milkshakes.
S Place the bowl on the base and rotate as far as
possible in an anti clockwise direction.
S Insert the blade on the conical base.
S Add ingredients to be processed.
S Attach the lid (note mark) and rotate in an anti
clockwise direction as far as the lid lug.
S Press the release button and move the swivel
arm into the operating position.
S Attach the multi blender to the drive and rotate
as far as possible in an anti clockwise direc
tion.
S Select the desired setting with the rotary
switch.
S Add more ingredients through the feed tube
while the appliance is running.
Note: The lid cannot be removed while the ap
pliance is running and when the multi blender is
attached to the food processor.
After using the appliance
S Switch off the appliance with the rotary switch
and remove the multi blender from the drive.
S Rotate the lid in a clockwise direction and
remove.
S Empty the multi blender. To do this, restrain
the multi function blade on the conical base in
the multi blender.
S Remove the multi function blade from the
conical base.

Cutting discs

Reversible slicing disc - thick/thin
for cutting fruit and vegetables.
Designation on the reversible slicing disc:
1" for the thick slicing side
3" for the thin slicing side
Warning!
The reversible slicing disc is not suitable for
slicing hard cheese, bread, bread rolls or
chocolate.
Reversible shredding disc - coarse/fine
for shredding vegetables, fruit and cheese,
except hard cheese (e.g. parmesan).
Designation on the reversible shredding disc:
2" for the coarse shredding side
4" for the fine shredding side
Warning!
The reversible shredding disc is not suitable for
shredding nuts. Shred soft cheese with the
coarse side only.
Grating disc - medium fine
for grating raw carrots, hard cheese (e.g. parme
san) and nuts.
Warning!
The grating disc can be used on one side only.
It is not suitable for grating soft cheese or cheese
slices.
S Attach the bowl to the base and rotate as far as
possible in an anti clockwise direction.
S Place the slicing or shredding disc on the disc
holder with the required side face up. The
grating disc can be used on one side only.
S Insert the disc holder.
S Attach the lid (note mark) and rotate in an anti
clockwise direction as far as the lid lug.
S Press the release button and move the swivel
arm into the operating position.
S Attach the multi blender to the drive and rotate
as far as possible in an anti clockwise direc
tion.
S Select the desired setting with the rotary
switch:
Setting 1 and 2 for soft and crumbly ingredi
ents, otherwise setting 3.
S Place ingredients which are to be processed in
the filling shaft and gently force down with the
pusher. Observe filling height.
The maximum filling height is the lower edge of
the disc holder hub.
Tip: To ensure ingredients are cut uniformly, pro
cess small amounts of thinly cut ingredients.
Note: If the multi blender becomes blocked with
the ingredients which are being processed,
switch off the food processor, pull out the mains
plug, wait until the drive has stopped, remove the
multi blender from the drive, take the lid off the
multi blender and empty the filling shaft.
After using the appliance
d
Risk of injury!
Remove cutting discs with the disc holder only.
S Switch off the appliance with the rotary switch
and remove the multi blender from the drive.
S Rotate the lid in a clockwise direction and re
move.
S Take the cutting discs on the disc holder out of
the bowl.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido