Troubleshooting - JVCKENWOOD KD-R775S Manual De Instrucciones

REFERENCES
Change the display information
Each time you press , the display information changes.
• If the information is unavailable or not recorded, "NO TEXT", "NO NAME", or other
information (eg. station name) appears.
FM or AM Frequency Day/Clock
(For FM Radio Broadcast Data System stations only)
Station name (PS)
Day/Clock (back to the beginning)
CD or USB (For CD-DA)
Playing time Day/Clock
(back to the beginning)
(For MP3/WMA/WAV/FLAC files)
Playing time Day/Clock
Folder/file name (back to the beginning)
USB-IPOD Playing time Day/Clock
or ANDROID (back to the beginning)
PANDORA Station name Shared/Radio
Playing time Day/Clock
IHEARTRADIO Station name Track title
(back to the beginning)
SIRIUS XM Channel no./Channel name
Category name Day/Clock
AUX AUX Day/Clock
BT AUDIO BT AUDIO Day/Clock
20
Frequency Program type (PTY) Radio text+
Disc name Track title
Album title/Artist Track title
Album title/Artist Track title
Album title Artist Track title
(back to the beginning)
Track Artist Day/Clock
Artist Song title Content information
(back to the beginning)

TROUBLESHOOTING

Symptom Remedy
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
"MISWIRING CHECK Turn the power off, then check to be sure the terminals of
WIRING THEN PWR ON" the speaker wires are insulated properly. Turn the power
appears. on again.
"PROTECTING SEND Send the unit to the nearest service center.
SERVICE" appears.
Source cannot be selected. Check the [SRC SELECT] setting. ( 4)
• Radio reception is poor. Connect the antenna firmly.
• Static noise while
listening to the radio.
Disc cannot be ejected. Press and hold
to drop the disc when it is ejected.
"IN DISC" appears. Make sure nothing is blocking the loading slot when you
eject the disc.
"PLEASE" and "EJECT" Press , then insert the disc correctly.
appear alternately.
Playback order is not as The playback order is determined by the file name (USB)
intended. or the order in which files were recorded (disc).
Elapsed playing time is not This depends on the recording process earlier.
correct.
"NOT SUPPORT" appears Check whether the track is a playable format. ( 18, 19)
and track skips.
"READING" keeps flashing. • Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the USB device.
"CANNOT PLAY" flashes • Check whether the connected device is compatible with this
and/or connected device unit and ensure the files are in supported formats.
cannot be detected.
( 18, 19)
• Reattach the device.
to forcibly eject the disc. Be careful not