Battery Installation; Applying The Wrist Cuff - Perel Tools CBP1 Manual Del Usuario

10. Battery Installation

1. Turn off the unit first and slide the battery cover
in the direction of the arrow.
2. Insert or replace 2 x AAA-size alkaline batteries
respecting the polarity.
3. Slide the battery cover back in place.
4. Change batteries when
display.
Warning:
• Use only fresh alkaline batteries of the required size and type.
• Remove the batteries if the unit is not to be used for a long time. The batteries can leak
chemicals that can damage the unit's circuits.
• Check the batteries periodically and replace if necessary.
11. Programming Date and Time
1. Turn off the unit first and hold the reset button until 003
appears.
2. Set the year using the M button. Press the reset button to switch to the months.
3. Set the months using the M button. Continue to set the date and to time as per above. You
must set reset the time after each battery replacement.

12. Applying the Wrist Cuff

CBP1_v2
appears on the
7 PEREL