Headphone Jack - Denver Electronics MC-5010BT Manual De Instrucciones

3. Press the SKIP+ button to move to the next track on the disc.
4. Press and hold the SKIP- button, the current track will be scanned and move backwards to the
previous track(s); when the desired track section is found, release the button and normal play will
resume.
5. Press and hold the SKIP+ button, the current track will be scanned and move forward to the next
track(s); When the desired track section is found, release the selected button and normal play will
resume.
PROGRAM FUNCTION
The Program feature can be used to program up to 20 tracks to play in a selected order.
1. While in the stop mode only (CD is not playing), press the PROG Button, LCD Display will show the
wording "PROGRAM 01" and "PROGRAM 01" starts to flash.
2. Press the SKIP+ / SKIP- button to allocate the desired track.
3. Press the PROG button to select and store the track into memory.
4. Repeat step 2 to 3 to select up to 20 tracks.
5. To play the selected tracks (in the program mode), press the PLAY/PAUSE button. The track number
and the "PROGRAM" appear on LCD Display.
6. Press the SKIP- button to hear the previous or press the SKIP+ button to hear next program track.
7. Note: After all of the programmed tracks have played, the CD player will return to the stop mode.
8. To clear the programmed tracks from memory, press STOP two times.
AUX INPUT JACK
1. Press the STANDBY/FUNCTION button on the unit repeatedly, until the AUX icon shown on the
display.
2. OR, press the STANDBY button on the remote to turn on the unit, then press the FUNCTION button
on the remote until the AUX icon shown on the display.
3. Connect the AUX connect wire from the out jack of your Personal Player such as portable MP3 player
to the AUX input jack.
4. Play Start from your Personal Player.

HEADPHONE JACK

Your radio is equipped with a HEAPHONE JACK for private listening. Simply plug any 3.5 mm plug type
stereo headphone into the HEADPHONE JACK. With the headphone connected the speaker in the
radio will be automatically disconnected.
Handle a disc only by its edges. Do not touch the surface or rainbow-colored side of the disc.
SLEEP FUNCTON IN STANDBY ON MODE
1. Press the FUNCTION to the desired source.
2. Tune in the desired radio station or CD play or AUX mode and adjust the volume control.
3. Press the SLEEP Button. The "90" will appear on the display.
4. Repeatedly press the SLEEP Button for desired sleep time between 90, 80, 70, 60, 50, 40, 30, 20, 10
minutes.
5. The unit will automatically switch off when the SLEEP time expires.
ENG-8