Product Description And Specifications; Product Features - Bosch GAL 3860 CV Professional Manual Original

tery voltage must match the bat-
tery charging voltage of the char-
ger. Do not charge any non-re-
chargeable batteries. Otherwise
there is a risk of fire and explosion.
Do not expose the charger to rain or wet condi-
tions. Water entering a power tool will increase the risk of
electric shock.
Keep the charger clean. Dirt poses a risk of electric
u
shock.
Always check the charger, cable and plug before use.
u
Stop using the charger if you discover any damage. Do
not open the charger yourself, and have it repaired
only by a qualified specialist using only original re-
placement parts. Damaged chargers, cables and plugs
increase the risk of electric shock.
Do not operate the charger on an easily ignited sur-
u
face (e.g. paper, textiles, etc.) or in a flammable envir-
onment. There is a risk of fire due to the charger heating
up during operation.
Do not cover the ventilation slots of the charger. Oth-
u
erwise, the charger may overheat and no long function
properly.
Recharge only with the charger specified by the manu-
u
facturer. A charger that is suitable for one type of bat-
tery pack may create a risk of fire when used with another
battery pack.
In case of damage and improper use of the battery, va-
u
pours may also be emitted. Ensure the area is well-vent-
ilated and seek medical attention should you experience
any adverse effects. The vapours may irritate the respirat-
ory system.
Technical data
Charger
Article number
Battery charging voltage (auto-
matic voltage detection)
Charge current
Permitted charging temperature
range
ProCORE18 V batteries: Char-
ging time at battery capacity,
approx.
– 4.0 Ah
– 7.0 Ah
– 8.0 Ah
– 12.0 Ah
Bosch Power Tools
Under abusive conditions, liquid may be ejected from
u
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. Liquid ejected from the bat-
tery may cause irritation or burns.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product description and
specifications

Product features

The numbering of the components shown refers to the dia-
gram of the charger on the graphics page.
(1) Battery
(2) Green battery charge level indicator
(3) Red battery charge level indicator
(4) Charging slot
(5) Battery charge indicator
(6) Temperature monitoring indicator
(7) Cord wrap
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GAL 3680 CV
2 607 225 ...
2 607 226 ...
V
A
°
C
80%/100%
min
min
min
min 113 / 126
A)
A)
A)
14.4–36
8.0
0–45
32 / 51
50 / 64
68 / 79
1 609 92A 4Z5 | (08.05.2019)
English | 9
GAL 1880 CV
2 607 225 9..
2 607 226 0..
14.4–18
8.0
0–45
80%/100%
32 / 51
50 / 64
68 / 79
113 / 126