Farberware M3481RBR Instrucciones De Operación página 7

Assembly
WARNING:
- Always disconnect the plug (6) from the wall outlet before attaching or
removing accessories to/from the appliance. Allow moving parts of the
appliance to stop completely before handling.
- Incorrect assembly may lead to an unstable setup and might cause injuries.
• Place the appliance on a clean, flat and heat resistant surface.
• Lift the release lever (4) on the back of the appliance and then lift the head (2)
until it locks in place (ill.
• Insert the bowl (10) on the clamping plate (9) and turn clockwise to lock it in
b
place (ill. ).
• Insert the required attachment (12, 13, 14) onto the drive shaft (11). Push up and
turn it counterclockwise until it locks in place (ill.
• Lift the release lever (4) on the back of the appliance and then lower the head (2)
until it locks in place (ill.
the bowl (10).
WARNING:
- Do not use the appliance if the attachment (12, 13, 14) touches the bowl (10).
Risk of injuries and damage to the appliance ( Troubleshooting).
- Do not use the appliance without the bowl (10) securely in place (ill.
- Never place the pouring chute on the opposite side of the speed control
knob (5).
• In case of liquid mixtures, slide the splashing guard (15) onto the bowl (10) with
the pouring chute on the side of the speed control knob (5) (ill.
bottom rim of the splashing guard (15) sits properly in place onto the bowl (10).
NOTE:
- Do not use the appliance without any attachment (12, 13, 14) on the drive
shaft (11) (ill.
- Do not store the attachments (12, 13, 14) on the drive shaft (11).
- Never attempt to remove the bowl (10) from the clamping plate (9) during
operation.
• To disassemble, repeat previous steps in reverse order of assembly.
Stand Mixer_HA-3481RB_IM_US_V9_171220.indd 7
OPERATION
a
).
d ). Ensure the attachment (12, 13, 14) does not touch
).
g
c
).
7
e
).
). Ensure the
f
12/20/17 4:51 PM