General Guidelines - Perel GIK06N-4W Manual Del Usuario

3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of
this manual.
Keep this device away from dust and extreme temperatures.
Protect this device from shocks and abuse. Avoid brute force when
operating the device.
Familiarise yourself with the functions of the device before actually using it.

All modifications of the device are forbidden for safety reasons. Damage

caused by user modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an

unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not

covered by the warranty and the dealer will not accept responsibility for any
ensuing defects or problems.
Keep this manual for future reference.

4. Operation
Warning! Never touch the metal grid with your bare hands. If you need to
clean the tray, follow the safety instructions carefully.
4.1 Discharging the Device before Maintenance
1. Unplug the device from the mains.
2. Use a screwdriver with an insulated handle. Make sure you hold the
screwdriver by the handle only.
3. Short-circuit the 2 wires of the inner metal grid by gently touching them
simultaneously with the metal shaft of the screwdriver. This may cause a
spark.
4. Repeat until no more sparks appear.
4.2 Cleaning the Receptacle
The cleaning frequency depends on the intensity of use. Check the tray of the
device at least once a week. Clean more often if necessary.
1. Discharge the device.
2. Remove the receptacle: hold the housing and turn the receptacle (bottom
part) counter-clockwise. Then, pull the receptacle out of the housing.
3. Clean the receptacle with a brush.
Place the receptacle back. Align the protrusions of the tray with the notches in the
housing, push the tray in the housing and rotate it a quarter turn to secure it.
V. 04 – 21/11/2017
GIK06N-4W/GIK06N-6W/GIKW13
3 ©Velleman nv