LG U8500 Manual De Usuario página 213

emoción
3. Access Points
- User can list the available Access Points by
selecting "List" appears on Centre soft menu of
"Access point" parameter from Internet setting
value.
- User can add a new Access Point by selecting
"Add New" from "Option" menu.
- Press "Done" key to save any configuration
changes. The details for Access Point
parameters are as follows:
Connection title
Bearer
Authentication
User name
Password
APN
Traffic class
Req. max UL bitrate
94
Access Point profile name.
Choose the bearer from the list. (Default
is "UMTS/GPRS")
Choose the authentication from the list.
(Default is "No auth")
Information provided by Service Provider.
Information provided by Service Provider.
APN name to access network. Information
provided by service provider.
Choose the Traffic Class from the list.
(Default is "Subscribed")
Choose the Maximum Uplink Bitrate from
the list. (Default is "Subscribed")
Req. max DL bitrate Choose the Maximum Downlink Bitrate
from the list. (Default is "Subscribed")
Reliability class Choose the Reliability class from the list.
(Default is "Subscribed")
DNS server Choose the DNS server from the list.
(Default is "Automatic")
Dial-up number Required in case of Bearer is
"UMTS/GPRS/CSD" or "CSD". Information
provided by Service Provider.
Baud rate Required in case of Bearer is
"UMTS/GPRS/CSD" or "CSD" Choose the
value from select list. (Default is "9600")
Call type Required in case of Bearer is
"UMTS/GPRS/CSD" or "CSD" Choose Call
type from the list. (Default is "ISDN")
CSD username Required in case of Bearer is
"UMTS/GPRS/CSD" or "CSD" Information
provided by Service Provider.
CSD password Required in case of Bearer is
"UMTS/GPRS/CSD" or "CSD" Information
provided by Service Provider.