Care And Maintenance; Warranty Disclaimer - Hama EWS-840 Instrucciones De Uso

Display
6.5. Maximum and minimum temperature values
The base station automatically stores the maximum and minimum outdoor/indoor
temperature.
• Repeatedly press the mem. button (19) to switch between the current temperature,
minimum temperature (MIN) and maximum temperature (MAX).
• Press and hold the mem. button (19) for approx. 3 seconds to reset the stored maximum
and minimum values.
6.6 Low battery capacity
As soon as the battery symbol
the batteries in the base/measuring station is very low. Replace the batteries immediately.
Note – Replacing the batteries
• Note that the stations have to be resynchronised each time after you change the
batteries in the measuring or base station.
• To do this, remove the batteries from the other station and then reinsert them, or
change them as required.

7. Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents.

8. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.
12
appears on the display of the base station, the capacity of
Trend
Increasing
Constant
Decreasing