Battery Replacement - AEMC Instruments 502 Manual De Instrucciones

5.3

Battery Replacement

The symbol will appear on the LCD display
when the voltage drops below proper operating
range. This indicates that the batteries need to
be changed.
It is recommended to replace both batteries at the
same time.
• The meter must be in the OFF position and
disconnected from any circuit or input.
• Place the meter face down and loosen the
battery cover screw with a flat head screw-
driver.
• Replace the batteries with two fresh 1.5V AAA
(LR03) batteries.
• Replace the battery compartment cover and
tighten down the screw.
TRMS Clamp-on Meter Model 502
17