Hama EWS-810 Instrucciones De Uso página 7

• Install an anchor, screw, nail, etc. in the wall of your choice.
• Hang up the base/measuring station using the opening intended for this purpose.
6. Operation
Note – Input
Hold down the + button (17) or the – button (18) to select the values faster.
6.1. Connection to the measuring station
• After you insert the batteries, the base station automatically searches for a connection to
the measuring station and performs initial setup.
Note
• Initial setup takes approx. 3 minutes.
• Do not press any buttons during setup. Otherwise, values may not be transmitted
correctly and there is a risk of value errors and inaccuracies.
• The setup process is completed when the indoor (7) and outdoor (8) measurement data
is displayed.
• If the base station still does not receive a signal from the measuring station, press and hold
the + button (17) for approx. 3 seconds to start the manual search for the signal.
6.2. Selecting the channel/Other measuring stations
Note
You can install two more measuring stations in addition to the included measuring station.
Ensure that the base and measuring stations are set to the same channel.
Visit www.hama.com for suitable measuring stations.
6