Vat (Tax) Calculation; Discounts And Premiums Using The Percent Key - Sharp XE-A102 Manual De Instrucciones

VAT (Tax) Calculation

Your cash register provides the following six tax systems.
Your cash register is pre-programmed as manual VAT 1 to 4 system.
Auto VAT 1 to 4 system (automatic operation method using programmed percentages)
This system, at settlement, calculates VAT for taxable 1 through 4 subtotals by using the
corresponding programmed percentages.
Auto tax 1 to 4 system (automatic operation method using programmed percentages)
This system, at settlement, calculates taxes for taxable 1 through 4 subtotals by using the
corresponding programmed percentages, and also adds the calculated taxes to those subtotals,
respectively.
Manual VAT 1 to 4 system (manual entry method using programmed percentages)
This system provides the VAT calculation for taxable 1 through 4 subtotals. This calculation is
performed using the corresponding programmed percentages when V is pressed just after
S.
Manual VAT 1 system (manual entry method for subtotals that uses VAT 1 preset
percentages)
This system enables the VAT calculation for the subtotal. This calculation is performed using the
VAT 1 preset percentage when V is pressed just after S. For this system, the keyed-in VAT
rate can be used. In this case, after pressing S, enter the VAT rate and press V.
Manual tax 1 to 4 system (manual entry method using preset percentages)
This system provides the tax calculation for taxable 1 through 4 subtotals. This calculation is
performed using the corresponding programmed percentages when V is pressed just after
S. After this calculation, you must finalize the transaction.
Auto tax 1 to 3 and auto VAT 1 system
This system enables the calculation on the combination with automatic tax 1 through 3 and
automatic VAT 1. The combination can be any of VAT 1 corresponding to taxable 4 and any of tax
1 trough 3 corresponding to taxable 1 through 3 for each item. The tax amount is calculated
automatically with the percentages previously programmed for these taxes.
VAT/tax calculation for PLU items are performed according to the one set for its
associated department.

Discounts and Premiums Using the Percent Key

If you want to apply a discount or a premium for an item, enter the percent rate and press the
percent key. If you want to apply a discount or premium for the subtotal, enter all the items, press
S and then press the percent key following the percent rate.
Your machine is pre-programmed as discount. If you change to premium, refer to the
percent key programming section. Also you can preset a percent rate. If a percent rate is
preset, you do not have to enter a percent rate before pressing the percent key. For the
programming, also refer to the percent key programming section.
Example
Applying a 20.00% discount to an item belonging to department 3
8:# 20:% t
Example Applying a 15.00% discount to the subtotal of a transaction
8P 12P 8:! S 15:% t
Utilizing Various Features for Sales Entries
13