Description Of The Moped - RIEJU RS3 50 Manual Del Propietário

DESCRIPTION OF THE MOPED

DESCRIPTION OF THE MOPED
This moped incorporates a MINARELLI - NG (New Generation) engine with single cylinder two-stroke liquid-cooled, manual gear box
with electric start. Its displacement is 50 cubic centimetres, with a diameter of 40.3 mm bore and a stroke of 39 mm.
The ignition is carried out through an electronic generator 120 W 12-volt AT coil.
Clutch is multiple disc of steel and friction with springs of constant pressure, submerged in oil bath.
The engine is housed in a dual perimeter chassis of triangular section to provide great strength and handling with conical type
bearings.
Headlights are dual poliepsoidal beam.
Speedometer & instrument panel is digital.
The front suspension consists of a hydraulic inverted fork with 35 mm rods. or 41 mm in diameter (depending on model). The rear
suspension consists of a Mono-Shock damper. The front disc brake is 280 mm. diameter with a double-piston caliper.
The rear brake is 220 mm. in diameter.
Wheels are aluminium 17-inch.
12
RS3 50 DESCRIPTION OF THE MOPED