Orbegozo CP 91120 Manual De Instrucciones página 16

CP 91120
REMOTE CONTROLLER OPERATION:
Point the remote at the infrared sensor to power the fan.
MAINTENANCE
How to replace a led light
Please contact with you technical service.
CLEANING
Clean with a soft, dry cloth. Never use scouring pads, abrasive or chemical
cleaners. Do not
allow condensation to come in contact with the electrical components.
HI:turn on the fan at high speed.
MED: turn on the fan at medium speed.
LOW: turn on the fan at low speed.
OFF: turn off the fan at low speed.
LIGHT :ON/OFF –press and release immeditaly to turn
on or off the light.
1H, 2H, 4H, 8H: program operation of the fan (but not
light) 1 hour, 2 hours and 4 hours and 8 hours
respectively. to do this, then operate the fan and press
one of these 3 buttons, and after the selected time, the
fan stops working (note: light can not be programmed).
Battery: A23 12v
16