Leckey Mygo+ Manual De Usuario página 33

SECTION 9.5:
INDIVIDUAL
FOOTPLATE HEIGHT
To set the height of the footplate loosen
the bolt on the front of the calf support
A
tube and slide the footplate to the
required height and re-tighten the bolt.
To set the correct height of the footplate
measure the distance from the back of the
child's knee to the bottom of their heel.
You may have to adjust the angle to
achieve the required foot position.
To adjust the angle loosen the bolt
the multi-tool, set to the desired angle
and re-tighten. There is a safety popper to
indicate maximum safe extension. This can
be set with the child in the seat.
Always check the footplate
is secure to prevent the
user sliding forward and
down in the seat which
could pose a choking
hazard if a chest or trunk
harness is attached.
B
A
SECTION 9.6:
FOOTPLATE ANGLE
ADJUSTMENT
To set the angle to accommodate
plantarflexion or dorsiflexion, simply
loosen or tighten the hand knob
to select the angle you require.
The footplates can simply flip up
to aid transfer.
with
B
Leckey Mygo+ User Manual p33
A
A