Section I1. Getting Readyto Sew; Connecting Machine To Power Supply; For Your Safety; Operating Instructions - Sears Kenmore 385.15512000 Manual De Instrucciones

SECTION II. GETTING READY TO SEW
Connecting Machine to Power Supply
O Power supply plug (_) Power switch
(_) Outlet (_) Machine socket
(_) Machine plug (_) Light bulb
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power
1, "l]Jrn off the power switch _)
2 Insert the machine plug (_ into the machine socket (_,
3, Insert the power supply plugO into the outlet (_),
4 Turn the power switch (_)to turn on the power and sewing
light (_)
For Your Safety
* While in operation, always keep your eyes on the sewing
area Do not touch any moving parts such as the thread
take-up lever, handwheel or needle
* Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended.
When attaching or removing any parts
- When cleaning the machine.
* Do not place anything on the foot control, when not sewing
Operating Instructions:
"For appliances with a polarized plug (one blade
wider than the other)_ To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only one way
If it does not fit fully in the outlet, reverse the plug If it still
does not fit, contact a qualified electrician to install the
power outlet Do not modify the plug in any way!'
"Foot Controller Model YC-482J or TJC-150 is used with
Sewing Machine Models 385 15512XXX/
XXX - represents numbers 000 through 999
®
J
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster the
machine runs.
,t