Safety Instructions For Spray Guns - WAGNER W 600 Manual De Uso

W 600
these instructions. Power tools are dangerous when they are used by inexperienced
persons.
e) take proper care of your tools. Check whether the moving parts function
trouble-free and do not jam, whether parts are broken or damaged so that
the tool function is impaired. Have damaged parts repaired before using the tool.
Many accidents have their origin in power tools that have been maintained badly.
f) Use the power tool, accessories, insert tools, etc. in accordance with these
instructions and in a fashion specified for this special tool type. take the
working conditions and the activity to be carried out into consideration. The
use of power tools for purposes other than the intended ones can lead to dangerous
situations.
5. Service
a) Have your tool repaired only by qualified specialist personnel and only with
original spare parts. This ensures that the tool safety is maintained.
b) If the supply cord is damaged, it must be replaced by the manufacturer or it's
service agent or a similarly qualified person in order to avoid a safety hazard.

Safety Instructions for Spray Guns

•
C aution! Wear breathing equipment: Paint mist and solvent vapors are damaging to
health . Always wear breathing equipment and only work in well ventilated rooms or
using supplementary ventilating equipment . It is advisable to wear working clothing,
safty glasses, ear protection and gloves .
CAUtION: DANGER OF INjURy!
Never point the spray stream towards human beings or animals.
•
D o not use the spray guns to spray flammable substances .
•
T he spray guns are not to be cleaned with flammable solvents .
•
C aution against dangers that can arise from the sprayed substance and observe the
text and information on the containers or the specifications given by the substance
manufacturer .
•
D o not spray any liquid of unknown hazard potential .
•
T he device may not be used in workplaces covered by the explosion-protection
regulations .
•
T o avoid the hazard of explosion when spraying, provide for effective natural or
artificial ventilation .
•
T here must be no sources of ignition such as, for example, open fires, smoke of lit
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc . in the
vicinity during spraying .
•
E nsure that no solvent vapors are sucked in by the unit . Do not spray onto the unit!
GB
27