Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
÷
÷
Disc playback operation
I P_ayback
procedure
]
1
Press OPEN/CLOSE.
The disc tray will open.
12 Place a disc onto the tray.
Hold the disc, position it with the printed label side up, align
it with the guides, and ptace it in its proper position.
Press PLAY or OPENICLOSE.
The disc tray closes automatically.
On the screen, ,,A,, changes to "Reading" and then play-
back wilt commence.
• A menu screen may appear on the TV screen, if the
disc has a menu feature. In this case, press A,
V,
, I_ or ENTER to operate a menu feature.
4
Press STOP to end playback.
• The DVD/VCR memorizes
the stopped point, depend-
ing on the disc. "II1" appears on the screen. Press PLAY
to resume playback (from the scene point).
° if you press STOP again (m"
appears on the screen)
or unload the disc, the DVD/VCR will clear the stopped
point.
5 Then press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press POWER.
The disc tray closes automatically
and DVD/VCR turns off.
NOTES:
• tf a non-compatible
disc is loaded, "Incorrect Disc", "Region
Code Error" or "Parental Error" wilt appear on the TV screen
according to the type of loaded disc. tn this case, check your
disc again (see pages 23 and 28).
• Some discs may take a minute or so to start playback.
• A "Prohibition"
symbot "11t'"may appear at the upper left of
the screen. This symbot means either the feature you tried is
not available
on the disc, or the DVD/VCR
can not access
the feature at this time. This does not indicate a problem with
the DVD/VCR.
• When you set a single-faced disc tabel downwards
(i.e. the
wrong way up) and press PLAY or OPENICLOSE,
"Reading"
will appear and remain on the screen for approx. 40 seconds
and then it will change to "Incorrect Disc".
• Some ptayback operations of DVDs may be intentionally fixed
by software producers. Since this DVD/VCR plays DVDs ac-
cording to the disc contents the software producers designed,
some playback features may not be available. Also refer to
the instructions
supplied with the DVDs.
• When playing DTS-encoded Audio CDs, excessive noise wilt
be heard from the analog stereo outputs. To avoid possible
damage to the audio system, the consumer
should take
proper precautions
when the analog stereo outputs of the
DVD/VCR are connected to an amplification
system.
24
[Special
p_ayback
]
There may be a s_ight de_ay between
pressing
the button
and the function
activation,
Fast Forward
Playback
Press F.FWD during normal playback.
Each press d F.FWD will increase the speed of the search
l_l_-(x2),
_
(x4), _
(x8), _
(x20).
• To resume normal playback, press PLAY.
Review Playback
Press REW during normal playback.
Each press of REW will increase the speed of the search _,_
(x2), _
(x4), _
(x8), _
(x20).
• To resume normal playback, press PLAY.
Still Playback
Press PAUSE/STILL
during normal playback.
• To resume normal playback, press PLAY.
Frame Advance
Press PAUSEISTILL
during still playback.
One frame is advanced each time you press PAUSEISTILL.
• To resume normal playback, press PLAY.
Slow=motion
Playback
Press SLOW
during
normal playback or stitl playback.
Each press of SLOW will change the speed of the stow x1/2,
xl/4, xl/6, xl/7.
• To resume normal playback, press PLAY.
• To resume the still playback, press PAUSE/STILL.
Locating a chapter or track
Press SKBP (_'t}
Forward or SKBP (1,,_) Reverse
during
playback
to locate a chapter that you want to watch.
Each time you press the button, a chapter or track is skipped.
NOTE:
The unit is capable of holding a still video image or On screen
display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on
your TV for an extended period of time, you risk permanent
damage to your television screen.
Projection televisions are
very susceptible.
]
This unit will allow you to zoom in on the frame image, You
can then make selections by switching the position of the
frame.
I
Press ZOOM during playback.
The center part of the image will be zoomed in.
Each press of ZOOM will change the ZOOM O.1
(x 1.3), O_2 (x 1.5) and O_3
(x 2.0).
12 Press A / V or '_ / _ to view a different part of the frame.
You may move the frame from the center position to UP,
DOWN, LEFT or RIGHT direction.
3 In the zoom mode press ZOOM repeatedly to return to a
1:1 view (O_ Off).
NOTE:
You can use the Pause, Slow, Search or Skip feature in the
zoom mode.
÷
2F3P421A[E](24-27)
÷
1/25/05. 12:02 PM
Publicidad
Capítulos
Tabla de contenido
