Hilti SCO 6-A22 Manual De Uso página 11

2.3 Battery use and care
▶ Observe the special guidelines applicable to the transport, storage and use of Li-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Contact Hilti Service.
3 Description
3.1 Overview of the product
3.2 Intended use
The product described is a hand-held cordless cut-out tool. It is designed for making cut-outs in drywall
board, gypsum fiber board, composite materials and wood or wood-like materials.
The product can be equipped with a removable connector for an optional vacuum cleaner / dust removal
hose. This connector is designed to fit standard vacuum cleaner hoses. Use of a suitable adapter may be
necessary in order to connect a vacuum cleaner hose to the product.
▶ Use only Hilti Li­ion batteries of the B 18 / B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3 Items supplied
Cut-out tool, depth gauge, three collets (1/8", 5/32", 1/4"), clamping nut, hex. key, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Center or online
at: www.hilti.com
*2143544*
1
@
;
=
%
&
(
)
+
§
/
:
∙
$
£
|
2143544
Vacuum cleaner hose connector (accessory)
LED lights
Depth gauge
Securing screw
On/off switch
Switch-on interlock release button
Accessory tool
Collet
Clamping nut
Insulated gripping surface
Spindle lockbutton
Insulated gripping surface
Air vents
Release button with additional function
(charge state display activation)
Battery
English 5