Technical Data; Preparations At The Workplace - Hilti SCO 6-A22 Manual De Uso

3.4 Safety devices
This product has a motor protection system. It monitors current consumption and motor temperature and
prevents the product from overheating.
If the motor is overloaded through application of excessive working pressure, the product's performance
drops noticeably or it might stall completely.
If the power tool stalls or slows significantly due to overloading, release the pressure applied to the product
and then allow it to run under no load for approx. 30 seconds.
4 Consumables
The following accessory tools can be used with the cut-out tool:
Drywall
• Guidepoint bit (1/8")
• Standard bit (1/8")
• Universal guidepoint bit (5/32")
• Window/door guidepoint bit (1/4")
Metal
• Metal bit (5/32")
5

Technical data

Rated voltage
Rated speed under no load
Operating temperature
Storage temperature
Weight
Clamping nut
Collet diameter
Cutting bit shank diameter
Battery operating temperature
Battery charging starting temperature
Battery storage temperature
6 Operation
6.1

Preparations at the workplace

CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
6.1.1 Inserting the battery
1. Push the battery into the battery holder until it engages with an audible click.
2. Check that the battery is seated securely.
6 English
2
SCO 6-A22
21.6 V
30,000 /min
1 ℉ ... 140 ℉
(−17 ℃ ... 60 ℃)
−4 ℉ ... 158 ℉
(−20 ℃ ... 70 ℃)
3.1 lb
(1.4 kg)
/ " external hexagon
5
8
1/8", 5/32", 1/4"
1/8", 5/32", 1/4"
1 ℉ ... 140 ℉
(−17 ℃ ... 60 ℃)
14 ℉ ... 113 ℉
(−10 ℃ ... 45 ℃)
−4 ℉ ... 104 ℉
(−20 ℃ ... 40 ℃)
2143544
*2143544*