Pairing/Connecting Your Handsfree With Bluetooth Equipment; Pairing Your Handsfree With Bluetooth Handset; Pairing Your Handsfree With Other Bluetooth Equipment - ideus VV900 Manual De Usuario

VV900

2.4 Pairing/connecting your handsfree with bluetooth equipment

2.4.1 Pairing your Handsfree with Bluetooth handset

Before making and answering calls, you must pair your handsfree and phone.
Paring sets up a unique relationship between your handsfree and your handset.
The handset will memorize the handsfree's unique ID (or passkey). This ensures
that a unique and encrypted wireless link between your handsfree and handset
will be used during calls.
Detailed operation procedures are as follows:
1. Place your handsfree close to your Bluetooth handset, and ensure your
handsfree is power off, your handset is power on
2. Press and hold K1 for at least 6 seconds until the Blue and Red LEDs
alternate continuously. You will hear 2 power-up tones and a pairing tone to
indicate that the handsfree has successfully entered the paring mode
3. Following your phone user guide to active Bluetooth device search on the
phone side, on your phone screen you will see a list of Bluetooth equipment
found by the phone at the end of the searching process.
4. Select this Bluetooth Handsfree 'VV900' from the list and initiate pairing
following handset's on-screen prompts.
5. Continue to follow on-screen prompts to enter passkey "0000"and confirm
to pair the handsfree with your handset. Once the pairing procedure is
completed, you will hear a connecting tone, and then Blue LED gives 3
quick blinks per 2 seconds. This indicates that the handsfree device and the
handset are paired and connected.
Note:
1. If pairing is successful, handsfree's Red LED is off. The Blue LED gives 3
quick blinks per 2 seconds. If paring is failed the Blue and Red LEDs alternate
continuously (for about 2 minutes). You need to go back to above steps 3-5
to repeat the paring process.
2. Your handsfree will remain in the pairing mode for about 2 minutes. If paring
cannot be finished within 2 minutes, the handsfree will enter into the standby
mode (without Bluetooth connection in this case). You need to repeat the
above steps 2-5 to restart the pairing process.

2.4.2 Pairing your Handsfree with Other Bluetooth Equipment

In addition to Bluetooth phone, your handsfree can also pair with other Bluetooth
equipment for realizing short distance wireless communications. Similar pairing
procedures described in the previous Section can be used. You can follow the
user guide of the Bluetooth equipment to complete paring operations on the
equipment side.
Fonexion Manual VV900.indd 10
10
4/7/07 12:03:50