GPO JAM Manual De Uso página 13

Replacement of the Stylus (needle)
Remove the old stylus
1. Insert a screwdriver at the tip of the Stylus
And pressures in the direction of "A" downwards.
2. Remove the pin by pushing it forward and pull down
Install a new stylus
1. Hold the tip of the pin and insert the other edge
By pressing in the direction of "B" prints.
2. Slide in the direction of "C", until it is locked at the top.
13
GPO_JAM_ EU_User_Manual_Oct2017_v2.indd 13 02/10/2017 21:28