Assembly And Use Of The Nutri Ninja ® Cups - Ninja BL494 Instrucciones Importantes De Seguridad

Assembly and Use of the Nutri Ninja
WARNING: Handle the Pro Extractor Blades Assembly with care, as the blades are sharp.
WARNING: Never leave the appliance unattended while in use.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
shatter, which may cause personal injury.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Do not
store ingredients before or after blending in the Nutri Ninja cup with the blade assembly attached. Some
foods may contain active ingredients or release gases which will expand if left in a sealed container,
resulting in excessive pressure buildup that can pose a risk of injury. For storage, only use Sip & Seal Lid
to cover.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1 Fig. 2
1 Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3
Add ingredients to the Nutri Ninja cup.
4 Place the Pro Extractor Blades
screw it on clockwise until you have a good seal. (Fig. 1)
5 Turn the Nutri Ninja cup upside down and place it onto the
motor base, aligning the tabs on the cup with the motor base.
Rotate the Nutri Ninja cup clockwise until it locks in place, you
will hear a click when the lock is engaged. (Fig. 2)
6
Select the speed or Auto-iQ program that suits your needs.
(Fig. 3) The Auto-iQ program will stop the appliance
automatically at the end of the program.
7
To pause the appliance, press the selected speed or Auto-iQ
program a second time. When the program is paused, the
light on the program button will flash until you press it again
to resume the rest of the program.
USE
Fig. 3
onto the cup and tightly
®
Cups
®
Fig. 4
8 Turn the Nutri Ninja cup counter-clockwise and pull straight
up to remove. (Fig. 4, Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add ingredients
past the "Max Liquid" line.
9
Turn the cup upright and remove the Pro Extractor Blades by
twisting the Pro Extractor Blades counter clockwise. (Fig. 6)
10 Do not store blended contents with the Pro Extractor Blade
Assembly attached.
11 Place the Sip & Seal
and enjoy!
12 For storage, only use Sip & Seal lid to cover.
13 Be sure to store the Pro Extractor Blades Assembly attached
to an empty cup when not in use.
14 Make sure that the motor base is unplugged when not in use.
15 To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor base
and gently pull the unit up and towards
you.
REMOVAL
Fig. 5
lid onto the Nutri Ninja cup, twist to seal
®
www.ninjakitchen.com
Fig. 6
16