Installation Instructions; Step 1 - Unpack Air Conditioner; Step 2 - Install Exhaust - Haier HPC12XCR Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION INSTRUCTIONS

STEP 1 - UNPACK AIR
CONDITIONER
WARNING
Excessive Weight Hazard
Use two or more people to move and install air
conditioner.
Failure to do so can result in back or other injury.
Remove packaging materials. Save the carton and the foam
packaging for storing the air conditioner when not in use.
NOTE: There are NO packing materials inside the
air conditioner to remove—Do Not open the cabinet.
Properly dispose of/recycle all packing material.
Handle the air conditioner gently.
Keep the air conditioner upright and level. Do not set the air
conditioner on its side, front, back or upside down.

STEP 2 - INSTALL EXHAUST

1 . Connect the connectors #2 and #3 to two sides of exhaust
hose #1 to create an exhaust assembly.
2
1
3
2 . Sliding in one end of hose assembly (with hose connector
#2) to rear panel.
Then push the knob to fix the hose assembly firmly.
5

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Hpc12xhr

Tabla de contenido