Make A Call - JVC KD-X362BT Manual De Instrucciones

BLUETOOTH®
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 Perform 'Select an item (page 3 or 4)' operation to select an
item (see the following table).
3 Repeat step 2 until the desired item is selected or activated.
To return to the previous setting item, press
[SETTINGS]
[AUTO ANSWER] [01 SEC] to [30 SEC]: Answers an incoming call automatically in the selected
time (in seconds). ; [OFF]: Cancels.
[RING COLOR] KD-X361BT:
[COLOR 01] to [COLOR 49] ([COLOR 08]): Selects the illumination color
for the symbolic button as notification when there is an incoming call and
during a call. ; [OFF]: Cancels.
[RING ILLUMI]
KD-X362BT:
[BLINK 01] to [BLINK 05] ([BLINK 02]): Selects the blinking pattern for the
buttons as notification when there is an incoming call. ; [OFF]: Cancels.

Make a call

You can make a call from the call history, phonebook, or dialing the number.
Call by voice is also possible if your mobile phone has the feature.
1
Press to enter Bluetooth mode.
"(First device name)" appears.
• If two Bluetooth phones are connected, press
the other phone.
"(Second device name)" appears.
2
Perform 'Select an item (page 3 or 4)' operation to select an item (see
the following table).
3
To return to the previous setting item, press
[RECENT CALL]
.
Default: [XX]
[PHONEBOOK]
[DIAL NUMBER] 1 Perform the following operation to select a number (0 to 9) or character
again to switch to
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
(Applicable only if the phone supports PBAP.)
1 Press the following button to select a name or a phone number.
KD-X362BT: Volume knob
KD-X361BT: VOL +/–
• "<" indicates call received, ">" indicates call made, "M" indicates call
missed.
• "NO HISTORY" appears if there is no recorded call history or call number.
2 Press the following to call.
KD-X362BT: Volume knob
KD-X361BT: * ENTER
(Applicable only if the phone supports PBAP.)
1 Press 2 J / 1 K to select the desired letter (A to Z, 0 to 9, and OTHERS).
• "OTHERS" appears if the first character is other than A to Z, 0 to 9.
2 Perform 'Select an item (page 3 or 4)' operation to select a name.
3 Perform 'Select an item (page 3 or 4)' operation to select a phone
number to call.
• The phonebook of the connected phone is automatically transferred to the
unit when pairing.
• This unit can display only non-accent letters. (Accent letters such as "Ú" are
showns as "U".)
( , #, +).
KD-X362BT: Turn the volume knob
KD-X361BT: Press VOL +/–
2 Press S / T to move the entry position.
Repeat steps 1 and 2 until you finish entering the phone number.
3 Press the following to call.
KD-X362BT: Volume knob
KD-X361BT: * ENTER
.
15
ENGLISH