Steering Wheel-Mounted Controls (Swc); Wlan; Establishing A Wlan Connection; Setting Up A Mobile Wlan Hotspot - Blaupunkt BREMEN 975 Manual De Instrucciones

Steering wheel-mounted controls
(SWC)
Note:
Only for vehicles without CAN bus.
Up to 8 functions of the device can be operated via
existing steering wheel-mounted controls. This requires
assigning the desired functions to the buttons of the
steering wheel-mounted controls.
Note:
The SWC function operates with analogue control
signals (passive resistive matrix). Depending on the
vehicle type, you may require an additional interface.
In the main menu (if necessary under Apps), select
the SWC app.
rst step, assign the desired functions to up to 8
placeholders:
Select one of the placeholders [ 1 ] - [ 8 ].
Select a function for this placeholder.
of the placeholder.
Repeat these steps for every additional function to
be assigned to the steering wheel-mounted controls.
In the next step, assign the assigned placeholders to the
buttons of the steering wheel-mounted controls:
Tap on [ ].
Placeholder 1 and the assigned function are
displayed.
Press a button of the remote control for approx.
The displayed function is assigned to the button
being pressed.
Tap on [ ] to assign the next function.
Note:
Tap on [ ] to return to a previous function and, if
necessary to reassign it.

WLAN

The device can be connected with a network via WLAN.
In addition, the device can be used a mobile WLAN hot-
spot.
Note:
If the device s connected with the Internet via WLAN,
you can used Internet-based services and apps, e.g.
the preinstalled App Store and the Browser app. Both
are located in the main menu under Apps.
Steering wheel-mounted controls | WLAN | Useful information | Technical data

Establishing a WLAN connection

Setting up a mobile WLAN hotspot

Useful information

Warranty

ed by a check The warranty terms can be called up from
ed by the number www.blaupunkt.com.

Service

information about service partners in your country under
www.blaupunkt.com.

Technical data

Operating system
Voltage supply
Current consumption
Subject to technical changes!
Activate WLAN in the system settings (see the chap-
ter "System settings", WLAN menu item).
Under the WLAN menu item, select the WLAN net-
work with which you want to connect the device, and
enter the required password as necessary.
In the system settings, select the Wireless & networks
menu item.
Select the Tethering & portable hotspot submenu.
Enable the Portable WLAN hotspot option.
Select the Set up WLAN hotspot menu item to specify
the network ID (SSID), security protocol and pass-
word for the WLAN hotspot.
Operating voltage:
In operation:
In fast boot mode:
:
nd
Android 4.1.1
10.5 – 14.4 V
< 10 A
< 10 mA
< 3 mA
57