ASSEMBLY STEP 8
CONSOLE
CONSOLE MAST
A
CONSOLE CABLES
UPPER HANDLEBAR
B
BOLTS (X)
C
PRE-INSTALLED
SET SCREWS
LOWER HANDLEBAR
D
E
NOTE: Be careful not
to pinch any wires while
attaching the console.
HARDWARE BAG 8 CONTENTS :
BOLT (X)
10 mm
Qty: 4
Open HARDWARE BAG 8.
Attach the CONSOLE CABLES to the CONSOLE.
Carefully tuck the CONSOLE CABLES into the
CONSOLE MAST before attaching the CONSOLE.
Attach CONSOLE to CONSOLE MAST using 4
BOLTS (X).
Slide UPPER HANDLEBARS onto LOWER
HANDLEBARS making sure handlebars are
joined together completely. Secure UPPER
HANDLEBARS to LOWER HANDLEBARS using
PRE-ATTACHED SET SCREWS.
Make sure upper handlebars are as far down as possible.
Handlebars can be damaged If not secured correctly.
Repeat step D on the opposite side of the elliptical.
YOU ARE FINISHED!
13