Abus TVAC19000C Manual De Instrucciones página 23

⑩
WiFi settings
⑪
Motion detection
WiFi settings
In the WiFi settings you can select the desired network
with which the camera should be used for Internet
access.
When the menu item is selected, all the networks within
range will be displayed. Choose your network and enter
your own WiFi password.
To prevent access by unauthorized persons, protect
your network using encryption with WPA/ WPA2/
WPA2-PSK.
After the settings have been saved, restart the camera.
Please do not forget to remove the Ethernet adapter
cable (if it is used during initial installation).
If no connection has been established or if you have
entered the WiFi details incorrectly, press the Reset
button for five seconds to restore factory settings to the
camera.
The settings for motion detection are necessary for
notification via email or push notification and for motion-
controlled recording.
Detection mode
Here you can select which mode should be used for
notifications.
You have a choice between "Off" and "Software".
Off:
No notification/recording if motion is detected.
Software:
Motion detection is performed by the camera software.
Here you can define different motion detection
sensitivities for day and night-time. The higher the
sensitivity, the less motion is needed in the image to
trigger motion detection.
23
English