Battery Care; Battery Disposal - Bosch GLM 80 Instrucciones De Funcionamiento

Ocultar thumbs Ver también para GLM 80:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

batteries
may
personal injury and damage.
Charge
battery
temperatures
degrees F (0 degrees C) and
below +113 degrees F (45
degrees C). Store tool and
battery pack in locations where
temperatures will not exceed
120 degrees F (49 degrees C).
This is important to prevent
serious damage to the battery
cells.
Battery leakage may occur
under
extreme
temperature conditions. Avoid
contact with skin and eyes. The
battery liquid is caustic and could
cause chemical burns to tissues. If
liquid comes in contact with skin,
wash quickly with soap and water.
If the liquid contacts your eyes,
flush them with water for a
WARNING
charger, keep them away from
metal objects. For example, to
protect terminals from shorting
DO NOT place batteries in a tool
WARNING
battery or remove any com
ponent
projecting
burst
causing
pack
above
usage

Battery Care

When batteries are
not
in
tool

Battery Disposal

Do not attempt to
disassemble
from
minimum of 10 minutes and seek
medical attention.
in
Place charger on flat non-
+32
flammable surfaces and away
from flammable materials when
re-charging battery pack. The
charger and battery pack heat
during charging. Carpeting and
other heat insulating surfaces
block proper air circulation which
may cause overheating of the
charger and battery pack. If smoke
or melting of the case are
observed unplug the charger
immediately and do not use the
or
battery pack or charger.
Use of an attachment not
recommended or sold by Bosch
may result in a risk of fire,
electric shock or injury to
persons.
box or pocket with nails, screws,
or
keys, etc. Fire or injury may result.
DO NOT PUT BATTERIES INTO
FIRE OR EXPOSE TO HIGH HEAT.
They may explode.
battery terminals. Fire or injury
the
may result. Prior to disposal, protect
exposed terminals
the
insulating tape to prevent shorting.
-11-
with heavy

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Glm 80 + r 60

Tabla de contenido