Bosch GLM 80 Instrucciones De Funcionamiento página 18

Battery Charging
Do not use
chargers. The supplied battery
charger is designed for the
lithium-Ion
machine.
Observe the outlet voltage! The
voltage of the power source must
correspond with the data on the
type plate of the battery charger.
Note: The battery is supplied
partially charged. To ensure full
capacity of the battery, completely
charge the battery in the battery
charger before using your power
tool for the first time.
The lithium-ion battery can be
charged at any time without
reducing its service life.
Interrupting
procedure does not damage the
battery.
When the bottom segment of the
battery charge control indicator g
flashes, only
measurements can be carried out.
Charge the battery.
The charge procedure begins as
soon as the main plug of the
battery charger is plugged into
the socket outlet and the charge
connector 21 is plugged into the
socket 14.
The battery
indicator g indicates the charging
progress. During the charging
Preparation
other battery
battery in
the charging
a few
charge-control
procedure, the segments flash
one after the other. When all
segments
charge-control indicator g are
displayed,
your
completely charged.
Disconnect the battery charger
from the outlet when not using it
for longer periods of time.
The measuring tool cannot be
used
procedure.
WARNING
moisture!
Recommendations for Optimal
Handling of the Battery
Store the battery only within the
allowable temperature range, see
"Technical Data". As an example,
do not leave the battery in a
vehicle in the summer.
A significantly reduced working
period after charging indicates that
more the battery is used and must be
replaced.
Observe the notes for disposal.
-18-
of the
the battery
during the
Protect the battery
charger
battery
is
charging
against