Cameo OPUS S5 Manual De Usuario página 10

STAND-ALONE MODES (Stand Alone)
Starting from the main display, press ENTER to go to the main menu. Use the UP and DOWN control keys to select the Control menu and
press ENTER. Using the UP and DOWN buttons, now select the "Stand-Alone" menu option and confirm via ENTER. Now select one of the
three stand-alone modes using the UP and DOWN control keys and confirm via ENTER.
STAND-ALONE STATIC MODE (Static)
The Static mode, similar to a DMX controller, allows PAN, TILT, dimmer, strobe, colour wheel and gobo wheel, etc. to be set directly on the
unit with values from 000 to 255. This allows the user to create individual scenes without needing an additional DMX controller. You can
configure the settings as desired after you have selected Static mode, as described under "STANDALONE MODES". The submenu options
here correspond to channels 1 to 33 in the 33-channel Extended DMX modus (see DMX CONTROL, select submenu options via UP and
DOWN, change value via LEFT and RIGHT, confirm via ENTER). Press MODE repeatedly to return to the main screen.
STAND-ALONE AUTO PROGRAM (Auto Prog)
The 4 different Auto programs (Program 1 - 4) consist of pre-programmed head movements, gobo and color changes, etc.; the speed is
configured separately. Select Auto mode, as described previously under "STAND-ALONE MODES", confirm via ENTER, select the desired
Auto program via UP and DOWN, confirm via ENTER, and now change the value for the speed from 000 to 100 via LEFT and RIGHT as
desired. Confirm via ENTER. Press MODE repeatedly to return to the main screen.
SLAVE MODE (Slave)
Select Slave mode as described previously under "STAND-ALONE MODES". Connect the slave and master unit (same model, same software
version) using a DMX cable (Master DMX OUT - Slave DMX IN), and activate one of the stand-alone modes, Auto or Static, on the master
unit. The slave unit will now follow the master unit. Press MODE repeatedly to return to the main screen.
10