The Input Setting Menu - Sony VPL-S500U Manual De Instrucciones

The INPUT SETTING Menu

The INPUT SETTING menu is used to adjust the input
signal. Adjustable items are displayed in green.
D O T P H A S E :
INPUT
S I Z E H : 1 0 5 6
SELECT
S H I F T H : 1 9 1
PICTURE
F I L T E R : O F F
CTRL
C L A M P : A U T O
INPUT
C O L O R T E M P : H B M
SETTING
SET
S A V E T O M E M O R Y
SETTING
INPUT
INFO.
Operation
1. Select an item
Use the V or v key on the control panel to select the
item, then press the b or the ENTER key.
On the Remote Commander, move the joy stick up or
down to select the item, then move it to the right or
press the ENTER key.
2. Adjust an item
• When changing the adjustment level:
To increase the number, press the V or the b key.
On the Remote Commander, move the joy stick up
or to the right.
To decrease the number, press the v or the B key.
On the Remote Commander, move the joy stick
down or to the left.
Press the ENTER key to restore the original screen.
• When changing the setting:
Press the V or the v key to change the setting.
On the Remote Commander, move the joy stick up
or down to change the setting.
To restore the original screen, press the ENTER or
the B key.
On the Remote Commander, move the joy stick to
the left.
DOT PHASE
Adjusts the dot phase of the LCD panel and the signal
input from INPUT A.
D O T P H A S E : 1 0
.........................................................................................................................................................................................................
1) VGA is a registered trademark of International Business Machines Corporation, U.S.A.
2) VESA is a registered trademark of Video Electronics Standard Association.
I N P U T - A
1 0
V : 2 0
SEL: EXIT: MENU
SIZE
Adjusts the horizontal size of pictures input from
INPUT A.
S I Z E H : 1 0 5 6
The higher the setting, the larger the horizontal size of
the picture.
The lower the setting, the smaller the horizontal size of
the picture. Adjust the setting according to the
horizontal dots of the input signal.
Input signal
1)
VGA mode3 (640×480 dots)
VESA 2) 72 Hz (640×480 dots)
Macintosh13-inch mode (separate sync)
Macintosh16-inch mode
VGA mode1 (640×350 dots)
VGA mode2 (640×400 dots)
VESA 75 Hz (640×480 dots)
S VGA VESA 56 Hz (800×600 dots)
S VGA VESA 60 Hz (800×600 dots)
S VGA VESA 72 Hz (800×600 dots)
S VGA VESA 75Hz (800×600 dots)
S VGA VESA 85 Hz (800×600 dots)
XGA VESA 60 Hz (1024×768 dots)
XGA VESA 72 Hz (1024×768 dots)
Notes
• When a resolution of a signal input from the INPUT
A connectors is less than 832 (horizontal) × 624
(vertical) dots, areas around the pictures are displayed
in black.
• Compressed XGA signal is reproduced.
Setting
800
832
864
1152
800
800
840
1024
1056
1040
1056
1048
1076
1063
23
(EN)