Lcd Display - Miniland digimonitor 3.5" Manual De Instrucciones

MODE button (22) & Adjustment button (18)
Brightness, Contrast, Colour and Volume can be adjusted by these two buttons. Press Mode
button (22) once, Brightness
Adjustment button (18) +/-. The same can be done for Contrast
If you don't want any sound but a live video image, simply use the Adjustment button to
decrease the volume to zero level. Please note you can also directly press button (18) to
adjust volume level.
Channel Scan
This product enables you to use up to 4 different cameras with the same Intercom
continuously monitoring different areas.
Press Channel button (27) until
entered. The Intercom will remain in each channel for 5 seconds before automatically
switching to the next one & repeating the cycle continually.
To stop Scan function, press Channel button (27) again to return to specific channel number
with corresponding camera.
Out of Range & Button (20)
When the Intercom cannot receive transmission signal from the Baby unit, the Intercom will
emit a beeping sound (if button (20) is in the ON position) and the screen will display No
Signal for 30 seconds. After that, the screen switches off. In this case, please reduce the
physical distance between Camera and Intercom or make sure the Camera is functioning
well. When Button (20) is switched to OFF, switch to silence for a quiet environment & a 'No
Signal' sign appears on the screen to alert you.

LCD DISPLAY

These icons appear on the top part of screen whenever the Intercom is Power On. And the
icons will disappear automatically after a few seconds. If you want to recuperate them, simply
press TALK button once. They will appear again. And they disappear automatically after a
few seconds.
Signal strength indicating connection between units:
Channel number indicator:
Speaker Volume level
Lullaby selection
symbol appears first and it can be adjusted with the
is appeared on screen. Automatic scanning function is
ch1
, Colour and Volume .