Requirements For The Set-Up Location; Before Initial Use - Silvercrest SWW 1500 A1 Instrucciones De Uso

Initial use

Requirements for the set-up location

For safe and faultless operation of the device the set-up location must satisfy the
following criteria:
■ The device must only be operated in an upright position and completely assembled.
■ When using the pedestals the device must be placed on a fi rm, fl at and even fl oor.
■ When wall mounting the device must only be mounted in a fi xed position on a
verticle wall.
■ The minimum distances of the housing from other objects must be maintained, they
are; 100 mm at the sides, 300 mm above, 150 mm below (with wall mounting)
and 500 mm in front.
■ Do not stand and/or hang the device in a hot, wet or very moist environment or
in the vicinity of fl ammable materials.
■ The mains wall socket must be easily accessible so that the mains power cord
can be easily removed in an emergency.
■ Environment temperature range: +5 to +45 °C
■ Humidity (no condensation): 5 - 90 %
DANGER
Fire hazard through contact with materials!
The risk of fi re exists if the heating elements come into contact
with fl ammable materials!
► Do not place and/or hang the device in the vicinity of curtains and other
fl ammable materials.
► Do not allow fl ammable materials (i.e. draperies) to come into contact with
the device.
► Do not cover the device.

Before initial use

■ Remove all packaging materials and all transport securing devices from the device.
NOTICE
► With initial use, for a brief period, a light odour accumulation can occur.
This is normal and completely harmless.
SWW 1500 A1
GB
MT
61