Custom-Setting Parameters - Airo YXEA03U Manual De Usuario

Description of Wired Controller

3. Custom-setting parameters

The internal parameters of the wired remote controller can be set with the actual usage
conditions.
Methods to set custom-setting parameters:
1. Hold down mode button
parameters custom-setting state, and then custom-setting parameter codes will be
displayed in temperature display area;
2. Press or
button to enter into the state to set this parameter, then its function code will flicker;
3. Press or
then the setting is completed.
The custom-setting parameters list is as shown below:
Custom-setting
parameter Implication of code display
code
01
03
05 operation setting is allowed or
06 Temperature display setting
Temperature measurement unit
07
08
13
14
and timer button
button to adjust to the custom-setting parameter code to be set, press timer
button to adjust function code and press timer button
Version No.
boot
Remote control/button
not
display setting
Cooling only setting
Buzzer setting
Backlight setting
for 3s simultaneously to enter into
Description
Restore factory setting
00-Remote control/button operation is enabled;
01-Remote control is disabled;
02-Button operation is disabled;
03-Remote control/button operation is disabled.
00-Display the set temperature;
01-Display the indoor environment temperature
00-Display in Celsius;
01-Display in Fahrenheit degree
00-Heat pump type air conditioner;
01-Cooling only air conditioner
00-Buzzer is valid;
01-Buzzer is invalid
00-Backlight is valid;
01-Backlight is invalid
22
to confirm,
Remarks
The
factory
setting
defaults to
0