Parameter Checking - Astralpool PRO-ELYO INVERBOOST Serie Manual Del Usuario

Parameter checking:

Press
first, then press
Code Condition
d0 IPM mould temperature
d1 Inlet water temp.
d2 Outlet water temp.
d3 Ambient temp.
d4 Return gas temp.
d5 Piping temp.
d6 Gas exhaust temperature
d7 Step of EEV
d8 Compressor running frequency
d9 Compressor current
d10 Current fan speed
d11 Error code for last time
Press
first, then press
Code Name
P1 Working mode
P2 Timer on/off
P3 Water pump
P4 Current time
P5 Timer on
P6 Timer off
Inlet
P7 temp.
correction
7. 7. 7. Start-up Start-up Start-up
to check the User parameter from d0 to d11
to check/adjust the User parameter from P1 to P7
Scope Default
0-1 1
0-1 0
0-1 0
HH:MM 00：00
HH:MM 00：00
HH:MM 00：00
water
-9～9 0
of of of the the the Heat Heat Heat Pump Pump Pump
Scope
0-120℃
-9℃～99℃
-9℃～99℃
-30℃～70℃
-30℃～70℃
-30℃～70℃
0℃～C5℃ (125℃)
0～99
0～99Hz
0～30A
0-1200 （rpm）
All error code
Remark
1 Heating mode，0 cooling mode
1 Timer on/off is under function，0 Timer on/off is
out of function (The setting of P4 and P5 won't
work)
1 Always running ， 0 Depends on the running of
compressor
0-23:0-59
0-23:0-59
0-23:0-59
Default setting: 0
- 58 -
Remark
Real testing value
Real testing value
Real testing value
Real testing value
Real testing value
Real testing value
Real testing value
N*5
Real testing value
Real testing value
Real testing value