Erreka VIVO-D201 Manual Del Instalador página 59

Peripheral connections
FT
ENCODER1
P13 P14 P15 P16 P17 P18 P19 P20
P1 P2 P3
R.E.
Plug-in receiver
ANT Antenna connection
SMF Traffic light card AEPS1-001
AUX Output 24Vdc (cable connectors + and AUX)
FT
Output 24Vdc for photocells (cable connectors
-FT and +)
A.T. -ST1
Total opening key device
(in dead man mode, open pushbutton)
S.EXT - FT1 Exterior safety device (photocell)
A.P. - ST2 Pedestrian opening key device (in dead
man mode, close pushbutton)
S.INT - FT2 Interior safety device (photocell)
STOP Emergency stop pushbutton (normally closed)
SCA SCA light (24Vdc)
EC
Electrolock (17Vdc)

We recommend checking the accessory instructions to carry out the connections
with the control board.
F3
P24 P25
ENCODER2
-FT
AUX
(Test)
24 Vdc
P21 P22 P23
P4 P5 P6 P7 P8 P9 P10 P11 P12
CN22
+24Vdc
MOTOR2
G4 G5 G6
MOTOR1
G7 G8 G9 G10
G1 G2 G3
LG
Garage light (voltage free output)
VIVO-D201: 230V, max 2,300W resistive
VIVO-D201M: 125V, max 1,250W resistive
DEST Flashing light; 60W max
(voltage free output)
VIVO-D201: 230Vac, VIVO-D201M: 125Vac
LB/LR Mechanical strip / resistive strip
BAT Rechargeable batteries (24 Vdc)
CHG
Exterior battery charger
CN22 Exterior charger selecter
(position bridge only for ADO01 charger)
F1
Primary fuse (5x20, 2A)
F2
Secondary fuse (5x20, 10A)
F3
Peripheral fuse (5x20, 2A)
INSTALLATION
F2
CHG
LB/ LR
F1
VIVO-D201:
VIVO-D201M:
N L
POWER - 230V
VIVO-D201:
VIVO-D201M:
VIVO-D201:
230Vac, max 2.300W
VIVO-D201M:
125Vac, max 1.250W
P144X
VIVO-D201 Control board
55