Satelec Air Max Manual De Uso página 5

2. Installation
Recommendations
For your safety, connections (water, air and electricity) should
be carried out by an approved installer of dental equipment.
The device requires the following connections (see technical
specifications chapter):
Carry out the connection to the drinking water supply
using an automatic cutoff valve of the Aquastop type,
or to the dental chair water supply.
Caution: always turn off the water supply when you
leave the dental practice.
Setting up the equipment
•
Position the device in the place where it is going to be
used.
•
Connect the foot control (ref. 16) to the connector on
the device (ref. 9).
•
Connect the water supply pipe with its filter to the
connector located at the rear of the device (ref. 12).
•
Connect the air supply pipe to the air filter located at
the rear of the device (ref. 8).
•
Plug in the power socket (ref. 14).
•
Open the supply taps (water-air).
3