Tabla de contenido
Publicidad
Symbols or its location may be different from the photo, depending on the model you have chosen.
1.
The transmitter of remote controller, which is located on the front part of remote controller, must point to indoor unit
signal receiver.
2.
Maximum distance between transmitter of remote controller and indoor unit signal receiver should be 8 meters.
3.
Make sure that there are no obstacles between transmitter of remote controller and indoor unit signal receiver.
4.
Do not drop down or through away remote controller.
5.
Do now allow any kind of liquid to enter inside remote controller.
6.
Before using remote controller for the first time, install properly batteries and make sure «+» & «-» poles are properly
positioned.
7.
Use two AAA batteries. Do not use rechargeable batteries.
8.
Do not expose the remote controller directly to the sunlight or excessive heat (e.g. oil radiator)
9.
If you don't use remote controller for a long period, remove the batteries to avoid possible leakage and damage.
GB
Note: When you power on remote controller for the first time, all functions will be
displayed on the screen. After a while only those corresponding to current operation
will be displayed
INSTRUCTIONS FOR PROPER USE OF THE REMOTE CONTROLLER
12
Publicidad
Tabla de contenido
