Black+Decker GR1000 Manual De Instrucciones página 17

making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power
tool. Power tools are dangerous in the hands
of untrained users.
e. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts and
any other condition that may affect the power
tools operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
5. Service
a. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
6. Electrical safety
Your tool is double insulated; therefore no earth
wire is required. Always check that the main voltage
corresponds to the voltage on the rating plate.
Warning! If the power cord is damaged, it must
be replaced by the manufacturer, authorized
BLACK+DECKER Service Center or an equally
qualified person in order to avoid damage or
injury. If the power cord is replaced by an equally
qualified person, but not authorized by
BLACK+DECKER, the warranty will not be valid.
Extension cables and Class 1 product
f A 3 core cable must be used as your tool is earthed
and of Class 1 construction.
f Up to 30m (100 ft.) can be used without loss of power.
7. Labels on tool
The label on your tool may include the following
symbols:
Hz .......
Read
Instructions
W ........
Manual
min .....
Use Eye
Protection
Use Ear
Protection
V ........ Volts
n .......
0
A ........ Amperes
Hertz
...... Class II
Watts
....
minutes
..... Alternating
....
Current
..... Direct
.../min..
Current
No-Load
Speed
8. Warning
Warning
Read the manual prior to
operation.
Flying debree.
Keep your distance.
Do not expose the
appliance to rain or high
humidity
Risk of electrical shock.
Keep the cable away from
the cutting blades.
Important! Before connecting the lawnmower to the
power supply, ensure that the socket has a differential
switch (circuit breaker) and that the supply voltage is the
same as that shown on the machine's identification label.
FEATURES (Fig.A)
1. Chassis
2. Transporting handle
3. Stone-deflector
4. Grass-catcher
5. Upper handle
6. Lower handle
7. Motor switch
8. Electric cable hood
9. Wheels
TRAINING
1. Read the instructions carefully. Be familiar with the
controls and the proper use of the equipment. Learn
how to stop the motor quickly.
2. Only use the lawn mower for the purpose for
which it was made, that is, the cutting and
collection of grass. Any other use can be dangerous
and result in damage to the machine.
3. Never allow children or people unfamiliar with
these instructions to use the lawn mower. Local
regulations may restrict the age of the operator.
4. Never use the lawnmower,
Construction
f When people, especially children, or pets are
Earthing
Terminal
Safety Alert
f If the operator has taken medicine or substances
Symbol
Revolutions
5. Keep in mind that the operator or user is
or Recipro-
cation per
responsible for accidents or hazards occuring to
minute
other people or their property.
ENGLISH • 17
nearby;
that can affect his ability to react and concentrate.
Beware of sharp blades.
Remove the plug from the
socket if the mains cable is
damaged or before
maintenance.
Sound power level.
Warning! The blades
will continue to rotate
after the machine is
switched off.
Atention! Always
wear safety glasses
Push and turn to change
the cutting position