ITS EKSELANS KVP 1430 Manual De Usuario página 99

- Call between different indoor units. Press the
other indoor units. The other indoor units will sound without image
on the screen. Press the
- Monitoring the outside. Press the
view the image of the street of the main outdoor unit. Press
again in order to close it. In case any button is pressed.
then image will disappear after 30 seconds. Being in moni-
tor mode it is possible to communicate
In case the user wants to monitor the slave outdoor unit (in case
installed), keep pressed the
- Using the user keys
the system connected, when passing the blue user card clo-
se to the front panel of the outdoor unit (RFID reader), the elec-
tronic lock will be opened for the programmed time.
7. TROUBLESHOOTING
There is no image / audio
• Make sure all connections are done and tight
• Make sure that cameras and speakers are clean from objects
and dust
• Make sure that the volume of the indoor and outdoor units
are correct
• Make sure that any magnetic device is interferring with the
microphones or speakers
The opening system of the door does not work
• Make sure all connections are done and tight
• Make sure that the consumption of the electronic lock can be
offered by the power supply
It is not possible to hear the external sound but the call tone is
heard
• Press the talk button
• Make sure all connections are done and tight
It is possible to hear and visualize the sound from
the outside but it is not possible to communicate
• Press the talk
cation in both ways. Just pressing the monitor
only established communication from the outdoor unit to the
indoor unit
• Make sure all connections are done and tight
button to get and hang up the call again.
or open the door
until the image is shown.
(Only for KVP 2700 / PE
button in order to establish the communi-
button to call
button in order to
.
2). Being
button it is
EN
97