Product Specifications; Features - Black Max BM80917 Manual Del Operador

Some of the following symbols may be used on this product. Please study them and learn their meaning for safe
operation of this product.
SyMBOL
Electric Shock
Chemical Burns

PRODUCT SPECIFICATIONS

Engine ............................................................................................................................................................... Honda GX390
Fuel Tank Capacity ..................................................................................................................................................... 1.61 gal
Maximum Pounds Per Square Inch Pressure* ......................................................................................................... 4,000 psi
Maximum Gallons Per Minute* ...................................................................................................................................4.0 gpm
Maximum Inlet Water Temperature ................................................................................................................................104˚F
*Max. rating determined by PWMA Standard 101, when tested with red nozzle
KNOW yOUR PRESSURE WASHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
ENGINE SWITCH
The engine switch is used in combination with the recoil
starter grip to start the engine. It is also used to turn the
engine off.
FUEL TANK
This fuel tank has a maximum capacity of 1.61 gal. Use
unleaded automotive gasoline in the engine.
HONDA GX390 ENGINE
This Honda engine enables the pressure washer to achieve
4,000 psi (pounds per square inch) at a rate of 4.0 gpm
(gallons per minute). Please read the engine manual included
with this product.
HOSE STORAGE REEL
The hose storage reel provides quick and easy storage of
the high pressure hose when not in use.
SyMBOLS
NAME
Failure to use in dry conditions and to observe safe practices
can result in electric shock.
To reduce the risk of injury or damage, DO NOT USE ACIDS,
ALKALINES, BLEACHES, SOLVENTS, FLAMMABLE MATERIAL,
OR INDUSTRIAL GRADE SOLUTIONS in this product.

FEATURES

Page 6 — English
EXPLANATION
PRESSURE RELIEF VALVE
The pressure relief valve prevents unsafe pressure levels
from building up in the pressure washer. It is not uncommon
to notice occasional drips from the valve.
RECOIL STARTER
The recoil starter is pulled to start the machine.
SPARK ARRESTOR
This engine is not factory equipped with a spark arrestor.
In some areas it is illegal to operate an engine without a spark
arrestor. A spark arrestor is available by calling customer
service for assistance.
THERMAL RELIEF VALVE
This pump feature will prevent water temperatures from
reaching harmful levels by releasing a small amount of water
from a plastic cap. Once the water has drained, the thermal
relief valve will reset itself.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides added
control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.