Rotel RT-1570 Manual De Instrucciones página 18

18
1. While pointing the remote at the unit, press and release the "NETWORK"
button on the remote control. Then press and hold the "2"
N
10 seconds. The unit will show "CD Custom Code 1--> 2". The RT-1570 is
now changed to CD remote codeset 2.
2. You must now change the remote to output codeset 2. To do this, press
"NETWORK" and "2" at the same time for 2 seconds, then release
N H
both keys.
3. Repeat the above procedure and press "1" key instead of "2" to change
the unit back to Codeset 1.
Troubleshooting
Most difficulties in audio systems are the result of incorrect connections, or
improper control settings. If you encounter problems, isolate the area of the
difficulty, check the control settings, determine the cause of the fault and
make the necessary changes. If you are unable to get sound, refer to the
suggestions for the following conditions:
Power Indicator Is Not Illuminated
The power Indicator should be illuminated whenever the unit is plugged into
the wall power outlet and is pushed in. If it does not light, test the power
outlet with another electrical device, such as a lamp. Be sure the power
outlet being used is not controlled by a switch that has been turned off.
Network Does Not Work
If you have trouble connecting to your wireless network, check your network
setting carefully, these steps may help to resolve the problem.
1. Confirm that a Wi-Fi network works, ie, PC can access the Internet using
the same network.
2. Check that a DHCP server is available, or that you have configured a
static IP address on the unit. Please refer to Network Config section.
3. Check that your network's firewall is not blocking any outgoing ports.
4. Do a hard power off (unplug the AC mains) and let the unit restart the
network scanning cycle.
5. If using Wi-Fi connection, make sure the placement of your unit allows
it to receive the Wi-Fi signal.
No Sound
1. Check the cables between the output and the pre-amplifier inputs, be
sure they are connected properly. Refer to Figure 3.
2. Music played from Internet Radio stations are affected by the speed
of your internet connection. If you find that music is cutting out regularly,
contact your internet service provider.
3. Make sure the station you selected is operating at the current hour. The
station can be broadcasting from a different time zone.
4. Make sure you select the correct type of internet connection either wired
or wireless.
Cannot Tune to DAB/DAB+ Preset Station
botton for Some stations may become unavailable and will be displayed in the Station
H
List with a "?" character in front of the station name. These stations are
no longer broadcasting or received by the RT-1570. Presets that are set
to these stations will not function and if selected the RT-1570 will display
the DAB menu. To remove stations no longer transmitting use the PRUNE
function in the DAB Menu. This will remove these stations from the Station
List and from the Preset list.
Media Playback Support Information
File Format
MP3
FLAC
WMA
ALAC
AAC
AIFF
WAV
Twonky
Synology
Assett
Windows Media Player
Jriver
RT-1570 Network/FM/DAB+ Tuner
Supported Network Playable Files
Notes
320kbps maximum
96kHz/24bit maximum
320kbps maximum
96kHz/24bit maximum (Only displays track name)
320kbps maximum
48kHz/16bit maximum
48kHz/16bit maximum
Supported Media Servers